1. Home
  2. Products
  3. TPV
  4. B series

Elastoplas® TPV are mainly consisted of different species of EPDM/PP with set composition ratios and vulcanized (or dynamically crosslinked) to afford the elastomers in a wide range of hardness and with unique properties. Our Elastoplas® TPV can meet customer demands in both qualities and quantities.

Characteristics

  • No chemical crosslink. Less permanent deformation.
  • Applicable in a wider temperature range from -40°C to 135°C than TPR.
  • Easy to process and switchable from PVC (polyvinyl chloride) by using conventional injection and extrusion molding machineries.
  • Recyclable, retaining 95% of the initial properties after five recycles.
  • Good flexibility and high tear strength. Excellent resistance to ageing, ozone, hydrolysis, and weather.
  • Environmental friendly materials certified by RoHS, REACH SVHC, and PAHs.
  • Customizable according to customer specifications.

Specification

Physical properties ASTM
Testing Methods		 Units B40 B50 B55 B60 B65 B70 B75 B80 B90 B40D B50D
Hardness D 2240 Shore A/D 40A 50A 55A 60A 65A 70A 75A 80A 90A 40D 50D
100% Modulus D 412 kgf/cm² 15 18 21 24 26 32 36 45 65 80 96
Tensile Strength D 412 kgf/cm² 28 38 43 55 65 70 80 95 150 165 240
Elongation at Break D 412 % 340 350 400 430 480 500 510 550 580 600 640
Tear Strength D 624 kg/cm 15 16 20 22 24 26 35 40 60 80 90
Compression Set
(100°C)		 D 395
method B		 % 28 30 30 30 32 35 35 38 42 50 54

The above values are shown as typical values and should not be used as specifications.

Online message

Back

  • 403 5F., No. 229, Zhongxing St., West Dist., Taichung City 403022 , Taiwan (R.O.C.)

    TEL：+886-4-232-15616  FAX：+886-4-2310-9292